Universal
Indicator N480i
This low cost and
easy-to-use universal indicator can be programmed by non-experienced users. Full
rangeability and a 24Vdc output for remote transmitters are standard.
Product Details
description
The
N480i is a low-cost, reliable, robust and compact universal indicator. This 1/16th
DIN IP65 unit is easy to program with front-key access and accepts a wide range
of universal inputs. The flexibility and accuracy of the instrument is characteristic
of a top-end process meter, but the unit also benefits from low cost and ease
of both installation and use. Full rangeability and decimal point configuration
ensure a simple set-up, and with the options of relay outputs and 24Vdc transducer
power supply, the N480i is by far the best buy in its price range.
specification
Input:
Universal, Programmable input accepts thermocouple types J, K, T, E, N, R, S,
B, 2- or 3-wire PT100 RTD, 4-20 mAdc, 0-50 Vdc and 0-10 Vdc without hardware change
or recalibration
CJC: Automatic cold junction compensation/cable resistance
compensation
Sensor Failure: Detects sensor failure conditions
Sampling
Rate: 10 measurements per second
Internal A/D resolution: 15000 steps (displayed
resolution: 7500 steps)
Features internal auto-zero and auto-range function
for maximum measurement stability
Display: Four digit 10 mm red LED display
for measured variable and four digit 7 mm green LED display for setpoint
Tag:
Read Only eight digit electronic serial number can be viewed on the display
Buttons:
Silicone rubber keypad
Operating environment: 0 to 55ºC, 20 to 95% RH
Front
panel: IP65, polycarbonate UL94 V-2
Back panel: IP30, ABS+PC UL94 V-0
Case:
Flame retardant polycarbonate enclosure
Dimensions: 48 x 48 x 110 mm (1.89
x 1.89 x 4.33 ")
Panel cutout: 45.5 mm x 45.5 mm (1/16th DIN unit)
Weight:
130g
Consumption: 3VA maximum
Power Supply: Universal switched mode power
supply guarantees high accuracy even under severe mains power oscillations
Power:
85 to 250 Vac, 50/60 Hz
Product
Models
Ref.:
Description
80480I0004
N480I - Input: Thermocouples,
PT100, 4-20mA, 0-10V e 0-50mV - Power Supply: 24Vdc/ac
80480I0000
N480I - Input: Thermocouples, PT100, 4-20mA, 0-10V, 0-50mV - Power Supply: 85/264Vac
Details
Manual
