| | | 4-20mA
Temperature Transmitter output, 0-10Vdc, Head mounted, Rtd Pt100, 0-50mV and thermocouple
input type K, J, T, E, R, S... | | |
| | |
| MICROPROCESSOR
BASED PROGRAMMABLE TEMPERATURE TRANSMITTERS
is the reliable way to transmit a signal to the readout and control system.The
transmitter
will take the low-level signal from the thermocouples, RTD or
0 to 50mV input and convert it to a strong
high-level signal 4-20mA or 0
to 10Vdc output, which can be transmitted over long distances without compromising
or weaken the signal. The signal can be sent to the readout and control system
with twisted nickel plated copper wires instead of using high cost thermocouple
wires when using a direct wiring system. Direct wiring system can cause problems,
especially when running over long distances. Signal from the thermocouple or RTD
are very weak and can be easily affected by RFI and EMI interferences. These transmitters
are robust and immuned to RFI and EMI interferences. Further more, it can be programmed
to accept thermocouple, Rtd or 0-50mV input. It also allow upscale and downscale
temperature setting. User can set error correction and sensor failure detection
if desire with ease. Non-isolated transmitter
for use with ungrounded probes. Isolated transmitter
should be used with grounded probe. | | |
| | | |
| Abbreviations | 1
2<--go
to page | | |
| | | | | | | |
| RHX
= Model PT100B
= 100 Ohms Class B 2C
= 2 Conductors 14D
= 1/4" O.D. sheath L12
= 12 inches long probe 304
= Stainless Steel 304 tube FEP
= Teflon insulation cable 1/2-1/2
= 1/2" NPT process, 1/2" NPT conduit 3/4-3/4
= 3/4" NPT process, 3/4" NPT conduit AH
= Cast aluminum head AHX
= Explosion proof cast aluminum head TX
= Non- isolated temperature transmitter TXI
= Isolated temperature transmitter SX
= Stainless Steel 304 explosion proof head SB
= Stainless Steel 304 hex bushing |  |  | | |
|  | TxConfig
Cable Adaptor & Software $80.00CAD | | |
| | | |
| RHX-PT100B-2C-14D-L12-304-FEP-1/2-1/2-AH-TX
12" long,
1/4" O.D. Probe with Non- Isolated Temperature Transmitter Pt100 class B
Rtd 2 wires. 1/2" NPT process, 1/2" NPT conduit
$120.00CAD RHX-PT100B-2C-14D-L12-304-FEP-1/2-1/2-AH-TXI
With Isolated Temperature Transmitter c/w 12" long
probe Pt100 class B Rtd 2 wires and 1/2"x1/2" NPT.
Available
in 3/4" X 3/4" NPT with same price $180.00CAD |  
Non-Isolated
Manual
Isolated Manual | | |
| | | |
| RHX-PT100B-2C-14D-L12-304-FEP-1/2-1/2-AH-TX-12SSC2 12"
long, 1/4" O.D. Probe with Non- Isolated Temperature Transmitter Pt100 class
B Rtd 2 wires. 1/2" NPT process, 1/2" NPT conduit c/w adjustable stainless
steel 304 compression fitting. $195.00CAD
|  | | |
| | | | | | | |
| | | |
| RHX-PT100B-2C-14D-L12-304-FEP-1/2-1/2-AH-TX-SB 12"
long, 1/4" O.D. Probe with Non- Isolated Temperature Transmitter Pt100 class
B Rtd 2 wires. 1/2" NPT process, 1/2" NPT conduit.
$175.00CAD |  | | |
| | | | | | | |
| | | |
| RHX-PT100B-2C-14D-L12-304-FEP-1/2-1/2-AH-TX-12SSC2 12"
long, 1/4" O.D. Probe with Non- Isolated Temperature Transmitter Pt100 class
B Rtd 2 wires. 1/2" NPT process, 1/2" NPT conduit c/w SS304 compression
flange. $250.00CAD | 
Flange
drawing | |
| | |
| RHX-PT100B-2C-14D-L12-304-FEP-3/4-3/4-SX-TX
Non- Isolated
Temperature Transmitter and c/w 12" long probe Pt100 class B Rtd 2 wires
and 1/2" NPT process, 3/4" NPT conduit.
$250.00CAD RHX-PT100B-2C-14D-L12-304-FEP-3/4-3/4-SX-TXI
Isolated Temperature Transmitter c/w 12" long probe
Pt100 class B Rtd 2 wires and 3/4" NPT process, 3/4" NPT conduit.
Reg. $310.00 $290.00CAD | 
| Stainless
Steel explosion proof head dIICT6 | |
| | | |
| | 1
2<--go to page
| | |
| | | | | | | | |
