| | Temperature
transmitters 4-20mA, 0-10Vdc output, isolated and non isolated, thermocouples,
mV, or RTD Pt100 input | MICROPROCESSOR
BASED PROGRAMMABLE TEMPERATURE TRANSMITTERS
is the reliable way to transmit
a signal to the readout and control system.The transmitter
will take the low-level
signal from the thermocouples, RTD or 0 to 50mV input and convert it to a strong
high-level signal 4-20mA or 0 to 10Vdc output, which can be transmitted over
long distances without compromising or weaken the signal. The signal can be sent
to the readout and control system with twisted nickel plated copper wires instead
of using high cost thermocouple wires when using a direct wiring system. Direct
wiring system can cause problems, especially when running over long distances.
Signal from the thermocouple or RTD are very weak and can be easily affected by
RFI and EMI interferences. These transmitters are robust and immuned to RFI and
EMI interferences. Further more, it can be programmed to accept thermocouple,
Rtd or 0-50mV input. It also allow upscale and downscale temperature setting.
User can set error correction and sensor failure detection if desire with ease.
Non-isolated transmitter for use with ungrounded probes. Isolated
transmitter should be used with grounded probe. | | | | | | |
| |
Non
isolated temperature transmitter with RS232 programming cable, software c/w head
mounted probe J/K/T calibration. Package price at
Part# TxBlockpack
Isolated temperature transmitter with RS232 programming
cable, software c/w head mounted probe J/K/T calibration. Package price at
Part# TxIblockpack |  | | | | For
transmitters price with probe Click
Here |  | | | PRINT
CALIBRATION FORM FOR TRANSMITTERS CLICK HERE | goto>>1
2 3
4 | | | |
| |
| | | | | |
Head
mounted non-isolated 4 to 20mA output temperature transmitters
4
to 20mA Thermocouple J K R S T N E B ,Pt100, VoltagePART#
TxBlock4-20 |  Info.
| | |
Head mounted
isolated 4-20mA output temperature transmitters.
PART# TxIsoBlock4-20
| Info. | | |
Non
isolated din rail temperature transmitters 4 to 20mA output
PART# TxRAIL4-20
|  Info. | | |
Isolated
din rail temperature transmitters 4 to 20mA output
PART# TxISoRAIL4-20 | |
Info.
| |
Isolated
din rail temperature transmitters 0 to 10Vdc output.
PART# TxISoRAIL0-10 | | | |
| Temperature
transmitter configuration usb cable adaptor and software cd. PART#
TxConfigA |  | | |
| | | | | |
Thermocouple
plug, standard Male type K connectors (Hollow Pins) Part
# TCPMLE-K $3.50 Canadian
Customers US Customers |  | | |
Thermocouple
jack, standard female type K adaptor (Hollow Pins) Part
# TCPFLE-K $3.50 Canadian
Customers US Customers | | |
Standard male TC plug type J connector (Hollow Pins)
Part # TCPMLE-J
$3.50 Canadian
Customers US Customers |  | | |
Standard TC Jack type J connector (Hollow Pins) Part
# TCPFLE-J $3.50 Canadian
Customers US Customers | | |
Thermocouple
Mini Male plug type K (Flat Pins) Part
# MTCPMLE-K $4.00 Canadian
Customers US Customers |  | | |
Thermocouple
Mini jacks type K (Flat Pins) Part
# MTCPFLE-K $4.00 Canadian
Customers US Customers | | |
Thermocouple
Mini Male plug type J (Flat Pins) Part
# MTCPMLE-J $4.00 Canadian
Customers US Customers |  | | |
Mini Female TC jack type J adaptor (Flat Pins) Part
# MTCPFLE-J $4.00 Canadian
Customers US Customers | | |
Standard
Aluminum Thermocouple Head 1/2" NPT Process x 1/2" NPT conduit (IP68)
P/N AH12 $15 |  | | |
Standard
Aluminum Thermocouple Heads 3/4 x 3/4"NPT (IP68)
Part# AH34 | | | |
Small
Aluminum Thermocouple Head 1/4 process x 3/8 conduit NPT (IP68)
Part# SAH $12 |  | | |
Explosive
Proof Aluminum Thermocouple Heads 1/2" X 1/2" NPT (IP68)
Part# XAH Canadian
Customers US Customers |  | | |
Explosive
Proof Stainless Steel Thermocouple Heads 3/4" X 3/4" NPT (IP68)
Part# SXH |  | | |
Ceramic terminal block for thermocouple head or RTD connections
(ceramic terminal block with 2, 3, 4, 6 screw terminals Part#Part#
CTB-TC |  | | |
| | | | | |
| goto>>1
2 3
4 | | |
| | | | | |
